Skip to content

linux

Warning

This is automatically generated. In case of any issues, please refer to the source code or, even better, open an issue on the GitHub repository. Thanks! 🤗📖

Platforms:

Commands

enable

Output: 

null

Help: enter enable mode

Prompt: - linux$

ip vrf show

Output: 

Name              Table
-----------------------
vrf-blue            10
vrf-red             20

Help: execute the command "ip vrf show"

Prompt: - linux$ - linux#

ip address show

Output: 

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens32: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:0c:29:56:07:1b brd ff:ff:ff:ff:ff:ff
    inet 192.168.131.128/24 brd 192.168.131.255 scope global dynamic ens32
       valid_lft 1307sec preferred_lft 1307sec
3: gpd0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc fq_codel state UNKNOWN group default qlen 500
    link/none
    inet 10.20.20.12/32 scope global gpd0
       valid_lft forever preferred_lft forever
4: br-218f5e637867: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:5d:d7:c2:c1 brd ff:ff:ff:ff:ff:ff
    inet 172.21.0.1/16 brd 172.21.255.255 scope global br-218f5e637867
       valid_lft forever preferred_lft forever
5: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP group default qlen 1000
    link/ether ee:be:e9:28:70:69 brd ff:ff:ff:ff:ff:ff
6: brblue: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-blue state UNKNOWN group default qlen 1000
    link/ether 66:37:23:9b:9e:e4 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.1/24 scope global brblue
       valid_lft forever preferred_lft forever
    inet 192.168.0.1/25 scope global brred
       valid_lft forever preferred_lft forever

Help: execute the command "ip address show"

Prompt: - linux$ - linux#

Output: 

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
 2: ens32: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 00:0c:29:56:07:1b brd ff:ff:ff:ff:ff:ff
 3: gpd0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 500
    link/none
4: br-218f5e637867: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default
    link/ether 02:42:5d:d7:c2:c1 brd ff:ff:ff:ff:ff:ff
5: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether ee:be:e9:28:70:69 brd ff:ff:ff:ff:ff:ff
 6: vrf-red: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether d6:a6:dd:0d:d5:f9 brd ff:ff:ff:ff:ff:ff
 7: brblue: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-blue state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 66:37:23:9b:9e:e4 brd ff:ff:ff:ff:ff:ff
8: brred: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-red state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether da:ca:17:97:f5:34 brd ff:ff:ff:ff:ff:ff

Help: execute the command "ip link show"

Prompt: - linux$ - linux#

arp -a

Output: 

? (192.168.13.197) at 00:04:4b:cc:9c:ba [ether] on eth1.100
? (192.168.10.100) at <incomplete> on eth1.10
? (192.168.13.252) at 5c:e2:8c:fc:a4:74 [ether] on eth1.100
esxi (192.168.13.5) at 00:e0:67:05:9d:5a [ether] on eth1.100
 ? (192.168.13.253) at dc:f7:19:cd:d6:c4 [ether] on eth1.100
? (192.168.123.199) at 00:0f:c9:0e:c8:ec [ether] on eth0.21
? (192.168.10.52) at <incomplete> on eth1.10
? (192.168.10.7) at 00:0c:29:02:3b:93 [ether] on eth1.10
? (192.168.10.249) at 00:0c:29:bb:5f:a2 [ether] on eth1.10

Help: execute the command "arp -a"

Prompt: - linux$ - linux#

ip route show

Output: 

default via 10.0.0.4 dev brblue
unreachable default metric 4278198272
 broadcast 10.0.0.0 dev brblue proto kernel scope link src 10.0.0.1
10.0.0.0/24 dev brblue proto kernel scope link src 10.0.0.1
local 10.0.0.1 dev brblue proto kernel scope host src 10.0.0.1
broadcast 10.0.0.255 dev brblue proto kernel scope link src 10.0.0.1
192.168.0.0/24 via 10.0.0.2 dev brblue
192.168.131.2 dev ens32 proto dhcp scope link src 192.168.131.128 metric 100

Help: execute the command "ip route show"

Prompt: - linux$ - linux#