fortinet¶
Warning
This is automatically generated. In case of any issues, please refer to the source code or, even better, open an issue on the GitHub repository. Thanks! 🤗📖
Platforms:¶
Commands¶
enable¶
Output:
Help: enter enable mode
Prompt: - fortinet>
get system interface physical¶
Output:
== [onboard]
==[dmz1]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[dmz2]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[mgmt]
mode: static
ip: 1.2.3.4 255.255.255.248
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port1]
mode: static
ip: 2.3.4.5 255.255.255.240
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port2]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port3]
mode: static
ip: 66.51.24.44 255.255.255.248
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port4]
mode: static
ip: 192.168.111.1 255.255.255.0
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port5]
mode: static
ip: 3.4.5.6 255.255.255.240
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port6]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[port7]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port8]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port9]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port10]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port11]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port12]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port13]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port14]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port15]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[port16]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
==[wan1]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[wan2]
mode: static
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
==[modem]
mode: pppoe
ip: 0.0.0.0 0.0.0.0
ipv6: ::/0
status: down
speed: n/a
Help: execute the command "get system interface physical"
Prompt: - fortinet> - fortinet#
get system status¶
Output:
Version: FortiGate-1500D v6.0.7,build0302,191112 (GA)
Virus-DB: 16.00560(2012-10-19 08:31)
Extended DB: 1.00000(2018-04-09 18:07)
Extreme DB: 1.00000(2018-04-09 18:07)
IPS-DB: 6.00741(2015-12-01 02:30)
IPS-ETDB: 15.00748(2019-12-19 04:16)
APP-DB: 15.00756(2020-01-10 02:10)
INDUSTRIAL-DB: 15.00756(2020-01-10 02:10)
Serial-Number: FG1K501234567890
IPS Malicious URL Database: 2.00521(2020-01-10 04:24)
Botnet DB: 1.00000(2012-05-28 22:51)
BIOS version: 05000006
System Part-Number: P12917-08
Log hard disk: Available
Hostname: MYCOOLEFIREWALLNAME
Operation Mode: NAT
Current virtual domain: root
Max number of virtual domains: 10
Virtual domains status: 7 in NAT mode, 1 in TP mode
Virtual domain configuration: enable
FIPS-CC mode: disable
Current HA mode: a-p, master
Cluster uptime: 102 days, 22 hours, 39 minutes, 22 seconds
Cluster state change time: 2019-12-22 05:24:41
Branch point: 0302
Release Version Information: GA
FortiOS x86-64: Yes
System time: Fri Jan 10 23:10:02 2020
Help: execute the command "get system status"
Prompt: - fortinet> - fortinet#
get system ha status¶
Output:
HA Health Status: OK
Model: FortiGate-600E
Mode: HA A-P
Group: 5
Debug: 0
Cluster Uptime: 36 days 22:20:40
Cluster state change time: 2020-12-02 22:40:46
Master selected using:
<2020/12/02 22:40:46> FG6H0Exxxxxxxxxx is selected as the master because it has the largest value of override priority.
ses_pickup: enable, ses_pickup_delay=disable
override: enable
Configuration Status:
FG6H0Exxxxxxxxxx(updated 1 seconds ago): in-sync
FG6H0Eyyyyyyyyyy(updated 3 seconds ago): in-sync
System Usage stats:
FG6H0Exxxxxxxxxx(updated 1 seconds ago):
sessions=692, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=25%
FG6H0Eyyyyyyyyyy(updated 3 seconds ago):
sessions=303, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=23%
HBDEV stats:
FG6H0Exxxxxxxxxx(updated 1 seconds ago):
ha: physical/1000auto, up, rx-bytes/packets/dropped/errors=13086049757/51933375/0/0, tx=93993034207/102822032/0/0
FG6H0Eyyyyyyyyyy(updated 3 seconds ago):
ha: physical/1000auto, up, rx-bytes/packets/dropped/errors=93993244676/102822709/0/0, tx=13085729171/51934319/0/0
MONDEV stats:
FG6H0Exxxxxxxxxx(updated 1 seconds ago):
x1: physical/10000full, up, rx-bytes/packets/dropped/errors=166373929414532/122946162431/0/0, tx=51746004768400/50869381172/0/0
x2: physical/10000full, up, rx-bytes/packets/dropped/errors=49656542180617/50909579016/0/337, tx=165637609617619/122981014444/0/0
FG6H0Eyyyyyyyyyy(updated 3 seconds ago):
x1: physical/10000full, up, rx-bytes/packets/dropped/errors=409699822/4202261/0/0, tx=0/0/0/0
x2: physical/10000full, up, rx-bytes/packets/dropped/errors=12425072765/11621697/0/0, tx=0/0/0/0
Master: fgt-600e_a, FG6H0Exxxxxxxxxx, HA cluster index = 1
Slave : fgt-600e_b, FG6H0Eyyyyyyyyyy, HA cluster index = 0
number of vcluster: 1
vcluster 1: work 169.254.0.2
Master: FG6H0Exxxxxxxxxx, HA operating index = 0
Slave : FG6H0Eyyyyyyyyyy, HA operating index = 1
Help: execute the command "get system ha status"
Prompt: - fortinet> - fortinet#
get router info bgp summary¶
Output:
BGP router identifier 85.31.8.8, local AS number 65302
BGP table version is 13
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.204.35.84 4 65302 43173 43182 0 0 0 09w3d01h Active
10.205.35.95 4 65302 107081 107168 12 0 0 05:48:47 1
169.132.250.17 4 4224 0 0 0 0 0 never Idle
169.132.250.21 4 4224 0 0 0 0 0 never Idle
Total number of neighbors 4
Help: execute the command "get router info bgp summary"
Prompt: - fortinet> - fortinet#
get system interface¶
Output:
== [ ha ]
name: ha mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ mgmt ]
name: mgmt mode: static management-ip: 1.2.3.4 255.255.255.248 ip: 1.2.3.4 255.255.255.248 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ port1 ]
name: port1 mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ port2 ]
name: port2 mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ s1 ]
name: s1 mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ vw1 ]
name: vw1 status: up type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ x1 ]
name: x1 mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ modem ]
name: modem mode: pppoe management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ ssl.root ]
name: ssl.root ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: tunnel netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable wccp: disable
== [ npu0_vlink0 ]
name: npu0_vlink0 mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ fortilink ]
name: fortilink mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 169.254.1.1 255.255.255.0 status: up netbios-forward: disable type: aggregate netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ x1.113 ]
name: x1.113 mode: static management-ip: 0.0.0.0 0.0.0.0 ip: 2.3.4.5 255.255.255.0 status: up netbios-forward: disable type: vlan netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable
== [ loopback.0 ]
name: loopback.0 management-ip: 0.0.0.0 0.0.0.0 ip: 10.0.0.100 255.255.255.255 status: up type: loopback netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable
== [ VPN-TUN ]
name: VPN-TUN ip: 3.4.5.6 255.255.255.255 status: up netbios-forward: disable type: tunnel netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable wccp: disable
Help: execute the command "get system interface"
Prompt: - fortinet> - fortinet#
get system arp¶
Output:
Address Age(min) Hardware Addr Interface
192.168.1.4 0 b0:a8:6e:01:61:81 lan
192.168.1.110 0 3c:9b:d6:66:52:ab lan
192.168.1.111 0 18:64:72:c9:02:d2 lan
192.168.1.114 4 40:cb:c0:ce:81:85 lan
Help: execute the command "get system arp"
Prompt: - fortinet> - fortinet#